Instruction Manual

Chapter 14: Event Log and Syslog Server Commands
244 Section II: Advanced Operations
SAVE LOG
Syntax
save log[=temporary] filename= filename .log [full]
[module=
module ] [reverse] [severity=all| severity ]
[overwrite]
Parameters
log Specifies the event log whose events you want to
save to a log file. There is only one option:
temporary Specifies the temporary event log.
filename Specifies the filename for the log. The name can be
up to 16 alphanumeric characters, followed by the
extension ”.log.” Spaces are allowed. The filename
must be enclosed in quotes if it contains spaces.
Otherwise, the quotes are optional.
full Specifies the amount of information saved to the log.
Without this option, the log saves only the time,
module, severity, and description for each entry. With
it, the log also saves the filename, line number, and
event ID.
module Specifies the AT-S62 module whose events are to be
saved. For a list of modules, refer to Table 8 on
page 251. Omitting this parameter saves the events
from all the modules.
reverse Specifies the order of the events in the log. Without
this option, the events are saved oldest to newest.
With this option, the events are saved newest to
oldest.
severity Specifies the severity of events to be saved. The
options are:
all Saves events of all severity levels.
severity Saves events of a particular severity.
Choices are I for Informational, E for Error,
W for Warning, and D for Debug. You can
select more than one severity at a time (for
example, E,W). For a definition of the
severity levels, see Table 9, “Event Log
Severity Levels” on page 253. The default
is E, W, I.