User Manual

Chapter 10: File Downloads and Uploads
118 Section II: Advanced Operations
 Config (set default and reboot) - Select this option to download a
configuration file as the new active boot configuration file for the
switch.
 File - Select this option to download a CA certificate or a
configuration file that is not to be the switch’s active boot
configuration file.
9. Click Apply.
The management software notifies you when the download is
complete.
Caution
After downloading a system image file, the switch must decompress
it and write it to flash. This can require one to two minutes to
complete. Do not reset or power off the unit while it is
decompressing the file. Once the file has been decompressed, the
switch automatically resets. Your web browser management
session will end. To continue managing the switch, you must
reestablish the management session.
Note
If you download a configuration file using the Config selection, the
switch automatically designates it as the active configuration file and
resets. At the completion of the reset, the switch operates with the
parameter settings in the downloaded configuration file. The reset
ends your web browser management session. To continue
managing the switch, you must reestablish the management
session.