User Manual

Chapter 19: SNMPv3
224 Section III: SNMPv3
v1
Select this value to associate the Group Name with the SNMPv1
protocol.
v2c
Select this value to associate the Group Name with the SNMPv2c
protocol.
v3
Select this value to associate the Group Name with the SNMPv3
protocol.
11. In the Security Level field, enter a security level.
Select one of the following security levels:
No Authentication/Privacy
This option represents neither an authentication nor privacy protocol.
Select this security level if you do not want to authenticate users and
you do not want to encrypt messages using a privacy protocol. This
option provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c,
NoAuthenticationNoPrivacy is the only security level you can select.
Authentication
This option permits an authentication protocol, but not a privacy
protocol. Select this security level if you want to authenticate SNMP
users, but you do not want to encrypt messages using a privacy
protocol.You can select this value if you configured the Security Model
parameter with the SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol. Select
this security level to allow authentication and encryption. This level
provides the greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3 protocol.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
12. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in