User Manual

Chapter 22: GARP VLAN Registration Protocol
316 Section V: Virtual LANs
Displaying the GVRP Settings
To view the GVRP settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. Select the Layer 2 option.
3. Select the GVRP tab.
For definitions of the GVRP parameters, refer to “Configuring GVRP”
on page 312.
4. To view GVRP switch and port configuration information, select one of
the following and click View:
View Port Configuration
Displays the status of GVRP on each port. Normal indicates that
GVRP is active on a port while None means it is inactive.
View GVRP Database
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.
View GVRP State Machine for VLAN
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection. You must enter a VID
number.
View GVRP Counters
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.
View GIP Connected Ports Ring
Refer to the AT-S62 Menus Interface User’s Guide for descriptions of
the status information displayed by the selection.