Owner manual

AT-S63 Management Software Features Guide
Section IX: Management Security 407
Distinguished Names
Part of the task to creating a self-signed certificate or enrollment request is
selecting a distinguished name. A distinguished name is integrated into a
certificate along with the key and can have up to five parts. The parts are:
 cn - common name
This can be the name of the person who will use the certificate.
 ou - organizational unit
This is the name of a department, such as Network Support or IT.
 o - organization
This is the name of the company.
 st - state
This is the state.
 c - country
This is the country
A certificate name does not need to contain all of these parts. You can use
as many or as few as you want. You separate the parts with a comma. You
can use alphanumeric characters, as well as spaces in the name strings.
You cannot use quotation marks. To use the following special characters
{=,+<>#;\<CR>}, type a “\” before the character.
Following are a few examples. This distinguished name contains only one
part, the name of the switch:
cn=Production Switch
This distinguished name omits the common name, but includes everything
else:
ou=Network Support,o=XYZ Inc.,st=CA,c=US
So what would be a good distinguished name for a certificate for the
AT-9400 Switch? If the switch has an IP address, such as a master switch
of an enhanced stack, you could use its address as the name. The
following example is a distinguished name for a certificate for a master
switch with the IP address 149.11.11.11:
cn=149.11.11.11