User guide

AT-S63 Management Software Command Line User’s Guide
Section I: Basic Operations 215
SET SWITCH TRUNK
Syntax
set switch trunk= name
select=macsrc|macdest|macboth|ipsrc|ipdest|ipboth
Parameters
trunk Specifies the name of the static port trunk.
select Specifies the load distribution method. Options are:
macsrc Source MAC address.
macdest Destination MAC address.
macboth Source address/destination MAC
address.
ipsrc Source IP address.
ipdest Destination IP address.
ipboth Source address/destination IP
address.
Description
This command is used to change the load distribution methods of existing
static port trunks.
Example
The following command changes the load distribution method to source
MAC address for a trunk named “Load11”:
set switch trunk=Load11 select=macsrc
AlliedWare Plus
Command
Syntax
interface trunk_name
port-channel load-balance dst-ip|dst-mac|src-dst-ip|
src-dst-mac|src-ip|src-mac
Mode
Static Port Trunk Interface mode
Command
Available
AlliedWare Plus