User guide

AT-S63 Management Software Command Line User’s Guide
Section IV: SNMPv3 539
DESTROY SNMPV3 VIEW
Syntax
destroy snmpv3 view= view [subtree=OID|text]
Parameters
view Specifies the name of the view, up to 32
alphanumeric characters.
subtree Specifies the view subtree view. The options are:
OID A numeric value in hexadecimal format.
text Text name of the view.
Description
This command deletes SNMPv3 View Table entries. After you delete an
SNMPv3 View Table entry, you cannot recover it.
Examples
The following command deletes the SNMPv3 View Table entry named
“experimental.“ The subtree value of this table entry is experimental.
destroy snmpv3 view=experimental subtree=experimental
The following command deletes the SNMPv3 View Table entry named
“directory.” The subtree value of this table entry is 1.3.6.1.3.
destroy snmpv3 view=directory subtree=1.3.6.1.3
AlliedWare Plus
Command
Syntax
no snmp-server view view subtree OID | text
Mode
Configure mode
Description
This AlliedWare Plus command is identical to the standard command.
Example
This example deletes an SNMPv3 View Table entry called “internet1” with
Command
Available
AlliedWare Plus