User Manual

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 159
Figure 54. Add New SNMPv3 Target Address Window
5. Configure the parameters, described in Table 27, for the new entry and
click the Apply button.
Table 27. SNMPv3 Target Address Table Parameters
Parameter Description
Target Address Name The name of the SNMP manager, or host, that manages the
SNMP activity on the stack. The name can be up to 32
alphanumeric characters.
IP Address The IP address of the host. The IP address is entered in this
format:
XXX.XXX.XXX.XXX
UDP Port Number The UDP port. The range is 0 to 65,535. The default port is
162.
Timeout The timeout value in milliseconds. When an Inform message is
generated, a response from the device is required. The timeout
value determines how long SNMPv3 considers the Inform
message as an active message. This parameter applies to
Inform messages only. The range is from 0 to 2,147,483,647
milliseconds. The default value is 1500 milliseconds.