Manual

165
Chapter 11
LACP Port Trunking Commands
This chapter contains the following commands:
 “ADD LACP PORT” on page 166
 “CREATE LACP AGGREGATOR” on page 167
 “DELETE LACP PORT” on page 169
 “DESTROY LACP AGGREGATOR” on page 170
 “DISABLE LACP” on page 171
 “ENABLE LACP” on page 172
 “SET LACP AGGREGATOR” on page 173
 “SET LACP SYSPRIORITY” on page 175
 “SET LACP STATE” on page 176
 “SHOW LACP” on page 177
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on LACP port trunks,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.