User guide

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 253
Select this security level if you do not want to authenticate SNMP
entities and you do not want to encrypt messages using a privacy
protocol. This security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c as the Security Model,
you must select No Authentication/Privacy as the Security Level.
Authentication
This option represents authentication, but no privacy protocol. Select
this security level if you want to authenticate SNMP users, but you do
not want to encrypt messages using a privacy protocol.You can select
this value if you configured the Security Model parameter with the
SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol. Select
this security level to allow authentication and encryption. This level
provides the greatest level of security. You can select this value if you
configured the Security Model parameter with the SNMPv3 protocol.
9. In the Storage Type parameter, select one of the following storage
types for this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the Target Parameters Table. After making changes to an Target
Parameters Table entry with a Volatile storage type, the Save Config
option is not displayed on the Configuration menu.
NonVolatile
Select this storage type if you want the ability to save an entry in the
Target Parameters Table. After making changes to an Target
Parameters Table entry with a NonVolatile storage type, the Save
Config option is displayed on the Configuration menu. Allied Telesis
recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 Target
Parameters Table entry will take effect immediately.
10. Click Apply to update the SNMPv3 Target Parameters Table.
11. To permanently save your changes, select the Save Config option in
the Configuration menu.