User guide

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 621
Example
This example displays the information about virtual router 16:
show vrrp=16
Step Value If a number is displayed, this is the value by
which the priority of the virtual router is
reduced by each VLAN port that fails or is
disabled. If “Proportional” is shown, the
priority is reduced in proportion to the
percentage of VLAN ports that are out of
service.
Port Reset Whether port reset is on. When on, the ports
of a VLAN that has a virtual router are reset
when a virtual router transitions from backup
to master status.
Monitored Interfaces Interface The name of an interface being monitored by
VRRP for this virtual router.
New Priority The new priority that the switch uses when
this interface becomes inoperative.
Counters Good Advertisements
Received
Number of acceptable advertisement packets
received by the switch for this virtual router.
Bad Advertisements
Received
Number of unacceptable advertisement
packets received by the switch for this virtual
router.
Master Periods Number of periods when the switch has been
the master switch.
Advertisements Sent Number of advertisement packets sent by the
switch.
Table 23. SHOW VRRP Command Information (Continued)
Section Parameter Description