User guide

Section I: Basic Features 85
Chapter 5
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
 “ADD SNMP COMMUNITY” on page 86
 “CREATE SNMP COMMUNITY” on page 88
 “DELETE SNMP COMMUNITY” on page 91
 “DESTROY SNMP COMMUNITY” on page 93
 “DISABLE SNMP” on page 94
 “DISABLE SNMP AUTHENTICATETRAP” on page 95
 “DISABLE SNMP COMMUNITY” on page 96
 “ENABLE SNMP” on page 97
 “ENABLE SNMP AUTHENTICATETRAP” on page 98
 “ENABLE SNMP COMMUNITY” on page 99
 “SET SNMP COMMUNITY” on page 100
 “SHOW SNMP” on page 102
Note
Remember to save your changes with the SAVE CONFIGURATION
command.