User Manual

Chapter 18: SNMPv3
242 Section III: SNMPv3
The SNMPv3 SecurityToGroup Table tab is shown in Figure 102.
Figure 102. SNMPv3 SecurityToGroup Table Tab (Configuration)
4. To create an SNMPv3 SecurityToGroup Table entry, click Add.
The Add New SNMPv3 SecurityToGroup page is shown in Figure 103.
Figure 103. Add New SNMPv3 SecurityToGroup Page
5. In the Security Model field, select the SNMP protocol that was
configured for this User Name.
Choose from the following:
v1
Select this value to associate the Group Name with the SNMPv1
protocol.