User Manual

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 75
Displaying the Enhanced Stacking Status
To display the enhanced stacking status of the switch, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Mgmt. Protocols option.
The Mgmt. Protocols page is displayed with the Server-based
Authentication tab selected by default, as shown in Figure 21.
Figure 21. Server-based Authentication Tab (Monitoring)
3. Select the Enhanced Stacking tab.