Manual

39
Chapter 2
Basic Switch Commands
This chapter contains the following commands:
 “DISABLE TELNET” on page 40
 “ENABLE TELNET” on page 41
 “PING” on page 42
 “RESET SWITCH” on page 43
 “RESET SYSTEM” on page 44
 “RESTART REBOOT” on page 45
 “RESTART SWITCH” on page 46
 “SET ASYN” on page 48
 “SET PASSWORD MANAGER” on page 49
 “SET PASSWORD OPERATOR” on page 50
 “SET SWITCH CONSOLETIMER” on page 51
 “SET SYSTEM” on page 52
 “SET TELNET INSERTNULL” on page 53
 “SET USER PASSWORD” on page 54
 “SHOW ASYN” on page 55
 “SHOW CONFIG DYNAMIC” on page 56
 “SHOW CONFIG INFO” on page 59
 “SHOW SWITCH” on page 60
 “SHOW SYSTEM” on page 63
Note
Remember to save your changes with the SAVE CONFIGURATION
command.