Owner manual

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 139
mcastratelimiting Enables or disables a rate limit for ingress multicast
packets. The options are:
yes, on, true, enabled Activates multicast
packet rate limit on
the port. The options
are equivalent.
no, off, false, disabled Deactivates multicast
packet rate limit on
the port. This is the
default. The options
are equivalent.
mcastrate Specifies the maximum number of ingress multicast
packets a switch port accepts each second. The
range is 0 to 262,134 packets. The default is
262,134 packets.
unkucastratelimiting Enables or disables rate limit for unknown ingress
unicast packets. The options are:
yes, on, true, enabled Activates unknown
unicast packet rate
limit on the port. The
options are
equivalent.
no, off, false, disabled Deactivates unknown
unicast packet rate
limit on the port. This
is the default. The
options are
equivalent.
unkucastrate Specifies the maximum number of ingress unknown
unicast packets a switch port accepts each second.
The range is 0 to 262,134 packets. The default is
262,134 packets.
Description
This command sets the maximum number of ingress packets a port
accepts each second. Packets exceeding the threshold are discarded.
You can enable the rate limiting threshold independently for broadcast,
multicast and unknown unicast packets.