Manual

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Operations 177
The default values are listed in Table 5.
4. In the Configure CoS Queues to Egress Queues section of the tab,
click the list for a CoS priority whose queue assignment is to be
changed and select the new queue.
For example, to direct all ingress tagged packets with a CoS priority of
5 to egress queue Q3, you would use the list in CoS 5 to PQ and
select Q3 - QoS PriorityQ 3.
5. If desired, repeat Step 4 to change the egress queue assignment of
other CoS priorities.
6. Click Apply.
7. To permanently save your changes, select the Save Config option in
the Configuration menu.
Table 5. Default Mappings of IEEE 802.1p Priority Levels to Egress Priority
Queues
IEEE 802.1p Priority
Level
Egress Port Priority
Queue
0Q1
1Q0
2Q2
3Q3
4Q4
5Q5
6Q6
7Q7