Manual

Chapter 3: Enhanced Stacking
64 Section I: Basic Operations
Selecting a Switch in an Enhanced Stack
This procedure explains how to select a switch to manage in an enhanced
stack. You can manage only one switch at a time. When you start a web
browser management session on an enhanced stack, you are initially
managing the master switch where you started the session.
To select a switch in an enhanced stack to manage, perform the following
procedure:
1. From the home page of the master switch, select Enhanced
Stacking.
Note
If the Home page does not have an Enhanced Stacking menu
option, the switch’s enhanced stacking status is either slave or
unavailable. For instructions on how to change a switch’s stacking
status, refer to the previous procedure:
To discover the switches in the stack, the master switch sends a
broadcast packet out the ports of its local interface and monitors the
interface for the responses from the switches. It displays the results in
the Stacking Switches page. An example is shown in Figure 11.
Figure 11. Stacking Switches Page