Manual

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 75
Modifying an SNMPv1 and SNMPv2c Community
To modify an SNMPv1 and SNMPv2c community, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select the Mgmt. Protocols option.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 13 on page 70.
4. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 14 on
page 72.
5. Click the button next to the community name to be modified and click
Modify. You can modify only one community string at a time.
The settings of the selected SNMP community string are displayed in
the Modify SNMPv1 & SNMPv2c Community page.
6. Modify the parameters as needed. For parameter definitions, refer to
“Creating a New SNMPv1 and SNMPv2c Community” on page 72.
You cannot change the community name of a string.
7. Click Apply.
The modifications are activated on the community string.
8. To permanently save the changes, select the Save Config menu
option.