Owner manual

AT-S63 Stack Command Line Interface User’s Guide
Section I: Basic Operations 93
Examples
This command displays all of the non-default parameter settings in the
stack:
show config dynamic
This command displays the non-default parameter settings for port-based
and tagged VLANs:
show config dynamic=vlan
MAC Static MAC addresses
MACTIMER MAC address table timeout value
MIRROR Source ports of port mirror
MIRTO Destination port of port mirror
PORT Port configuration
PORTTRUNK Static port trunks
ROUTE Static routes
STP Spanning Tree and Rapid Spanning Protocols
SWITCH Master Switch console timer, console startup
mode, serial port baud rate, Telnet server
SYSTEM Administrator name, switch name, and stack
location
VLAN Port-based and tagged VLANs
Table 2. Module Variable (Continued)
Variable Description