Manual

Chapter 22: SNMPv3
518 Section IV: SNMPv3
The Display SNMPv3 Access Table menu is shown in Figure 167.
Figure 167. Display SNMPv3 Access Table Menu
Displaying the
Display SNMPv3
SecurityToGroup
Table
Menu
This section describes how to display the Display SNMPv3
SecurityToGroup Table menu. For more information about the parameters
in the SNMPv3 SecurityToGroup Table menu, see “Creating an SNMPv3
SecurityToGroup Table Entry” on page 464.
To display the Display SNMPv3 SecurityToGroup Table menu, perform
the following procedure.
1. Follow steps 1 through 5 in the procedure described in “Displaying the
Display SNMPv3 User Table Menu” on page 515. Or, from the Main
Menu type 5->1->1->8->6.
2. From the Display SNMPv3 Table menu, type 4 to select Display
SNMPv3 SecurityToGroup Table.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display SNMPv3 Access Table
Group Name .... technicalsales Security Model . v3
Context Prefix. Security Level . AuthPriv
Read View...... internet Context Match .. Exact
Write View .... Storage Type ... NonVolatile
Notify View ... Row Status ..... Active
N - Next Page
U - Update Display
R - Return to Previous Menu
Enter your selection?