Instruction Manual

Chapter 39: 802.1x Port-based Network Access Control Commands
740 Section VIII: Port Security
AlliedWare Plus
Commands
Syntax
To set a port to the authenticator role and to specify the authenticator
state:
dot1x port-control auto
dot1x port-control force-authorized
dot1x port-control force-unauthorized
To remove a port from the authenticator role:
no dot1x port-control
To configure the authenticator port parameters:
dot1x quiet-period quietperiod
dot1x timeout tx-period txperiod
dot1x timeout re-authperiod reauthperiod
dot1x timeout supp-timeout supptimeout
dot1x timeout server-timeout servertimeout
dot1x max-req maxreq
dot1x port-control dir in
dot1x port-control dir both
To control reauthentication, which determines whether supplicants must
periodically reauthenticate:
dot1x reauthentication
no dot1x reauthentication
To control whether an authenticator port’s VLAN assignment is set by the
user account on the RADIUS server:
dot1x dynamic-vlan-creation enable
dot1x dynamic-vlan-creation disable
Mode
Port Interface mode
Description
You cannot use the AlliedWare Plus commands to set the following
authenticator port settings. To change these settings, use another
management interface:
 Authentication method
 Operating mode
 Piggyback mode
 Guest VLAN
 Secure VLAN