User Manual

Chapter 9: Event Logs and the Syslog Client
114 Section II: Advanced Operations
Clearing an Event Log
To delete all of the event messages in a log:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the System button.
3. Select the Event Log tab, shown in Figure 30 on page 106.
4. In the Log Settings section, click the radio button of the event log you
want to clear.
5. Click the Clear Log check box.
6. Click the Apply button to delete the events in the log. If the event logs
are enabled, the switch begins to store new events in the log.