User Manual

Chapter 11: SNMPv3
134 Section III: SNMPv3
Configuring the SNMPv3 User Table
To create, delete, or modify SNMPv3 User Table entries, refer to the
following procedures:
 “Creating a User Table Entry” on page 134
 “Deleting a User Table Entry” on page 137
 “Modifying a User Table Entry” on page 137
Creating a User
Table Entry
To create an entry in the SNMPv3 User Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for Configure User
Table and then the Configure button to display the SNMPv3 User
Table tab in Figure 38.
Figure 38. SNMPv3 User Table Tab
4. Click the Add button to display the Add New SNMPv3 User window in
Figure 39.