User Manual

Chapter 11: SNMPv3
158 Section III: SNMPv3
Configuring the SNMPv3 Target Address Table
Here are the procedures for managing the SNMPv3 Target Address
Table:
 “Creating a Target Address Table Entry” on page 158
 “Deleting a Target Address Table Entry” on page 160
 “Modifying a Target Address Table Entry” on page 161
Creating a Target
Address Table
Entry
To create an entry in the SNMPv3 Target Address Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the button next to the Configure Target
Address Table, and then click the Configure button to display the
SNMPv3 Target Address Table tab shown in Figure 53.
Figure 53. SNMPv3 Target Address Table Tab
4. Click the Add button to display the Add New SNMPv3 Target Address
window in Figure 54.