User Manual

Chapter 11: SNMPv3
174 Section III: SNMPv3
Displaying the
Access Table
Entries
To display the entries in the SNMPv3 Access Table:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for View Access Table
and the View button to display the SNMPv3 Access Table tab in
Figure 64. The parameters that define the access table entries are
described in Table 24 on page 145.
Figure 64. SNMPv3 Access Table Tab (Monitoring)