Datasheet

ManualsBrandsAllied Telesis ManualsNetworkingAT-STACKXG/0.5

Allied Telesis x610 Series Layer 3+ stackable switches offer an

impressive set of features in a high-value package, ideal for

enterprise network applications.

The Allied Telesis x610 Series is a

high performing and scalable solution

for today’s networks, providing an

extensive range of port-density and

uplink-connectivity options. With a

choice of 24-port and 48-port versions

and optional 10 Gigabit uplinks, plus the

ability to stack up to eight units, the x610

Series can connect anything from a small

workgroup to a large business.

High Performing

The x610 Series has fully non-blocking

switching on all ports, so IPv4 and

IPv6 Layer 2 switching and Layer 3

routing occur at wire speed with low

latency. This is ideal for high-end server

deployments, and, when combined with

a large L3 route table, for aggregating

gigabit connections.

Resilient

The x610 Series provides uninterrupted

access to online applications by

implementing a network with no single

point of failure. Distributing resources

across a stacked group of units means

no network downtime. A fully resilient

solution is created with Virtual Chassis

Stacking (VCStack™), where up to eight

units can form a single virtual chassis,

with dual connections to key servers

and access switches. VCStack can be

implemented in the same cabinet over

copper cabling, or to remote locations

using  ber.

Allied Telesis Ethernet Protection

Switching Ring (EPSRing) technology

provides a high-performing resilient

design for distributed networks. A high-

speed solution where recovery occurs

within as little as 50ms can be deployed

in ring-based topologies. Several

switches can form a protected ring,

running at up to 10Gbps.

Scalable

The  exibility of the x610 Series, coupled

with the ability to stack multiple units,

ensures a future-proof network. An

extensive range of port-density and

uplink-connectivity options enables

network connectivity for any size of

business. The choice of 24-port and

48-port versions and the choice of

Gigabit or 10 Gigabit uplink ports allows

you to tailor uplink bandwidth to suit

your network applications. Expansion

modules are available for local and long-

distance stacking, and can be con gured

to provide two additional 10G ports.

Flexible endpoint deployment is ensured

with the ability to power devices such

as IP phones, security cameras, and

wireless access points directly from the

switch. This convergence of voice, video

and data on today’s networks is enabled

by Power over Ethernet Plus (PoE+),

which has the added bene t of reducing

costs.

Secure

Advanced security features protect

the network from the edge to the

core. Network Access Control (NAC)

provides unprecedented control over

user access, to mitigate threats to

network infrastructure. NAC checks

users’ adherence to network security

policies, and then either grants access

or offers remediation. This ensures the

network is accessed only by known

users and devices. Secure access can also

be provided for guests.

Multiple customers can have their own

secure virtual network within the same

physical infrastructure, as the x610

Series switches are able to divide a

single router into multiple independent

virtual routing domains. Layer 3 network

virtualization provided by Virtual Routing

and Forwarding (VRF Lite) creates

independent routing domains, where IP

addresses can overlap without causing

con ict.

A secure network environment is

guaranteed, with powerful control

over network traf c types, secure

management options, and other multi-

layered security features built into the

x610 Series switches.

What’s New?

» EPSR SuperLoop Protection

» Optical DDM

» PIM Source - Specific Multicast

» TACACS+ Accounting

» Up to 64 VRF-Lite domains

alliedtelesis.com

x610 Series

LAYER 3+ NETWORK SWITCHES

Switches

PRODUCT INFORMATION

Summary of content (8 pages)

PAGE 1
Switches PRODUCT INFORMATION x610 Series LAYER 3+ NETWORK SWITCHES Allied Telesis x610 Series Layer 3+ stackable switches offer an impressive set of features in a high-value package, ideal for enterprise network applications. The Allied Telesis x610 Series is a high performing and scalable solution for today’s networks, providing an extensive range of port-density and uplink-connectivity options.
PAGE 2
x610 Series | Layer 3+ Network Switches Key Features VCStack » Create a VCStack of up to eight units with 48Gbps of stacking bandwidth to each unit. VCStack provides a highly available system where network resources are spread out across stacked units, reducing the impact if one of the units fails. Aggregating switch ports on different units across the stack provides excellent network resiliency. Mixed Stacking » The x610 Series is compatible with the x600 Series in a mixed VCStack of up to four units.
PAGE 3
x610 Series | Layer 3+ Network Switches Key Solutions Internet S 00 81 Remote VPN S 00 81 er ut Ro S 00 81 10 0 x6 x60 S 00 81 10 0 x6 x60 Network Attached Sorage Server Farm S 00 81 VCStack link 10 Gigabit link 1 Gigabit link 10/100 link Link Aggregation on m om C F A ver Ser A VR F R Shared printer R V F B Network Virtualization Virtual Routing and Forwarding (VRF Lite) allows multiple customers to share a common infrastructure, while maintaining their own independent virtual routi
PAGE 4
x610 Series | Layer 3+ Network Switches Specifications 10/100/1000T (RJ-45) COPPER PORTS 100/1000X SFP PORTS 1000X SFP COMBO PORTS AT-x610-24Ts 24 - 4 - AT-x610-24Ts-POE+ 24 - 4 AT-x610-24Ts/X 24 - 4 AT-x610-24Ts/X-POE+ 24 - 4 PRODUCT 10GIGABIT SFP+ PORTS MAX POE+ PORTS SWITCHING FABRIC FORWARDING RATE 2* - 96Gbps 71.4Mpps - 2* 24 96Gbps 71.4Mpps 2 4* - 136Gbps 101.2Mpps 136Gbps 101.2Mpps 101.
PAGE 5
x610 Series | Layer 3+ Network Switches Electrical Approvals and Compliances Restrictions on Hazardous Substances (RoHS) Compliance » EMC: EN55022 class A, FCC class A, VCCI class A » Immunity: EN55024, EN61000-3-levels 2 (Harmonics), and 3 (Flicker) – AC models only » EU RoHS compliant » China RoHS compliant Safety Country of Origin » Standards: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.
PAGE 6
x610 Series | Layer 3+ Network Switches Standards and Protocols AlliedWare Plus Operating System Version 5.4.
PAGE 7
x610 Series | Layer 3+ Network Switches Security Features SSH remote login SSLv2 and SSLv3 TACACS+ accounting TACACS+ authentication IEEE 802.1x authentication protocols (TLS, TTLS, PEAP and MD5) IEEE 802.1x multi-supplicant authentication IEEE 802.1x port-based Network Access Control RFC 2246 TLS protocol v1.
PAGE 8
x610 Series | Layer 3+ Network Switches Expansion Modules 10GbE SFP+ Modules AT-x6EM/XS2-00 Expansion module (2 x SFP+) for long-distance stacking or two additional 10GbE ports AT-SP10SR 10GSR 850 nm short-haul, 300 m with MMF AT-StackXG-00 Expansion module with one AT-StackXG/0.5-00 cable included AT-SP10LR 10GLR 1310 nm medium-haul, 10 km with SMF SFP Modules AT-SPFX/2 100FX multi-mode 1310 nm fiber up to 2 km AT-SPFX/15 100FX single-mode 1310 nm fiber up to 15 km Cables AT-StackXG/0.5-00 0.