Datasheet
ETHERNET AND FAST ETHERNET STANDALONE MEDIA CONVERTERS ETHERNET AND FAST ETHERNET STANDALONE MEDIA CONVERTERS PCI-BASED MEDIA CONVERTERS
SUBCATEGORY FEATURE AT-MC13 AT-MC101XL AT-MC102XL AT-MC103XL AT-MC103LH AT-MC104XL AT-MC115XL AT-MC116XL AT-MC605 AT-MC606 AT-FS201 AT-FS202 AT-PC232/POE AT-FS232 AT-FS232/1 AT-FS232/2 AT-FS238A/1 AT-FS238B/1 AT-MC102XL-PCI AT-MC102XL-PCIe
PORTS
Port 1
10T 100TX 100TX 100TX 100TX 100FX MMF (SC) 10T or 100TX 10T or 100TX 100TX 100TX 10/100TX 10/100TX 10/100TX 10/100TX 10/100TX 10/100TX 10/100TX 10/100TX 100TX 100TX
Port 2
10FL (ST) 100FX (ST) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC)
10FL (ST) or
100SX (ST)
10FL (SC) or
100SX (SC)
RJ-11
BNC 100FX (ST) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC) 100FX (SC)
Type
MMF MMF MMF SMF SMF SMF MMF MMF VDSL VDSL MMF MMF MMF MMF SMF SMF BiDi - SMF BiDi - SMF MMF MMF
IEEE STANDARD
10FL 100FX 100FX 100FX 100FX 100FX 100SX 100SX 100FX 100FX 100FX 100FX 100FX 100FX 100FX 100FX 100FX 100FX
Tx WAVELENGTH
850 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 850 nm 850 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 1550 nm 1310 nm 1310 nm
Rx WAVELENGTH
850 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 850 nm 850 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 1310 nm 1550 nm 1310 nm 1310 nm 1310 nm
MAX DISTANCE
2 km 2 km 2 km 15 km 40 km 15 km 2 km 2 km 3 km 2 km 2 km 2 km 2 km 2 km 15 km 40 km 15 km 15 km 2 km 2 km
FUNCTIONALITY
Rate and speed
■ ■ ■ ■ ■ ■
■
■
MissingLink support
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Smart MissingLink support
■ ■ ■ ■ ■ ■
Max frame size
9KB 9KB 9KB 9KB 9KB 9KB 9KB 9KB 1532 bytes 1532 bytes 1916 bytes 1532 bytes 1532 bytes 1532 bytes 1532 bytes 1532 bytes 9KB 9KB
Diagnostic LEDs
6 7 7 7 7 7 8 8 6 6 7 7 13 9 9 9 9 9 2 2
POWER OVER
ETHERNET
IEEE 802.3af Class 3
■
PoE-enabled ports 1
Max full power ports 1
Mode A
PoE power 15.4W
POWER SUPPLY
PSU type External External External External External External External External External
External External External Internal External External External External External PCI PCIe
Multi-region
■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
Compatible with AT-MCR12
12-slot chassis
■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
Compatible with AT-MCR1
1-slot chassis
■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■
DIMENSIONS
(W x D x H)
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
15.5 x 13.1 x 4 cm
6.1 x 5.16 x 1.58 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
10 x 9.5 x 2.5 cm
3.93 x 3.74 x 1 in
12.5 x 6.4 cm
4.9 x 2.5 in
12.5 x 6.4 cm
4.9 x 2.5 in
Weight .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .75 kg / 1.65 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .3 kg / .66 lb .06 kg / .14 lb .06 kg / .14 lb
Standalone Media Converters
Allied Telesis media converters enable the connection of disparate cabling types in networks where
many cabling types exist. Network segments may also operate at different speeds and media converters
can be used to convert between speeds. Typically, media converters are used to connect copper and
ber-optic cabling that coexist in a network. Converters exist in a variety of standalone, multi-port and
modular forms. These different physical forms address the need for different applications and conversion
densities.
MissingLink
™
The Allied Telesis MissingLink feature
enables media converters to pass the link
status of their connections and thereby
trigger corrective action when a problem on
a link is detected.
For example, if the twisted-pair cable to
the 10/100TX port on an Allied Telesis
media converter were to fail, the unit would
respond by dropping the link on the 100FX
ber-optic port.
Most managed devices, such as switches and
routers, can be congured to take a specic
recovery action in the event of the loss of
connection on a port. In some cases, the
unit can be congured to seek a redundant
path to a disconnected end-node or send
out a trap to a network management
station, and so alert the network
administrator of the problem.
AT-MC115XL / MC116XL
These media converters provide
connectivity at both 10 and 100Mbps,
providing conversion from copper 10T
to ber 10FL and copper 100TX to
ber 100SX. Operating at 850nm
wavelength over multi-mode ber, the
media converters can operate at up to
2km at 10Mbps and 300m at 100Mbps.
The AT-MC115XL supports a ber
ST connector, and the AT-MC116XL
supports ber SC.
» Operating Temperature 0° to 50°C
» 10T to 10FL
» 100TX to 100SX
» Multi-mode fiber with ST and SC connector
» Standalone, Rack or DINRAIL mounted
Smart MissingLink
™
The Allied Telesis Smart MissingLink feature
has identical operation to MissingLink, with
the added functionality that the media
converter will also ash the link LED of
the port with the link failure. This aids with
diagnostics, allowing network administrators
to more quickly locate and rectify the fault.
Redundancy
In many cases, Allied Telesis media
converters are critical components in
a network, carrying data between sites
over long distances. It is imperative that all
efforts are taken to ensure reliability of the
network, and thus a network design with
redundancy is mandatory. The components
most likely to fail are the power supplies.
The majority of Allied Telesis media
converters can be deployed with hot-
swappable, hot-removable power supplies
to ensure maximum uptime.
| Allied Telesis Products 34