Manual

AT-WA7400 Management Software User’s Guide
131
Configuring SNMP
Simple Network Management Protocol (SNMP) is another way for you to
manage the access point. This type of management involves viewing and
changing the management information base (MIB) objects on the device
using an SNMP application program.
To configure SNMP, perform the following procedure:
1. From the main menu, select Advanced > SNMP Configuration.
The SNMP Configuration page is shown in Figure 41.
Figure 41. SNMP Configuration Page
2. Configure the following parameters:
Public Community Name
This community name has read privileges only. Enter a name for the
public community name.
Private Community Name
The private community name has an access mode of read/write. If you
enable SNMP management, Allied Telesyn recommends that you
remove the private community name to prevent others from making
unauthorized changes to the access point.