Manual

AT-WA7400 Management Software User’s Guide
143
Configuring the Management VLAN
When you configure a management VLAN, only those users who have the
required IP address and subnet mask of the management AP can make
any management changes.
To configure the management VLAN, perform the following procedure:
1. From the main menu, select Advanced > VLAN Management.
The VLAN Management page is shown in Figure 44.
Figure 44. VLAN Management Page
To set up the management VLAN, you must first enable it.
2. For the Separated VLAN Management setting, click Enabled.
The rest of the fields on the page become available.
3. For the VLAN ID, setting, enter a number for the VLAN ID.
4. For the Management IP address, enter the AT-WA7400 management
IP address associated with this VLAN.
5. For the Management IP Subnet Mask, enter the subnet mask
associated with the VLAN.
6. Click Update.