Manual

Chapter 14: Load Balancing
158
The Load Balancing page is shown in Figure 48.
Figure 48. Load Balancing Page
2. Configure the following settings as required:
Load Balancing
To enable load balancing on this access point, click Enable. To disable
load balancing on this access point, click Disable.
Utilization for No New Associations
Utilization rate limits relate to wireless bandwidth utilization.
Provide a bandwidth utilization rate percentage limit for this access
point to indicate when to stop accepting new client associations.
When the utilization rate for this access point exceeds the specified
limit, no new client associations are allowed on this access point.
If you specify 0 in this field, all new associations are allowed
regardless of the utilization rate.
Utilization for Disassociation
Utilization rate limits relate to wireless bandwidth utilization.
Provide a bandwidth utilization rate percentage limit for this access
point to indicate when to disassociate current clients.
When the utilization rate exceeds the specified limit, a client currently
associated with this access point is disconnected.
If you specify 0 in this field, current clients are never disconnected
regardless of the utilization rate.
Stations Threshold for Disassociation
Specify the number of client stations you want as a stations threshold