Manual

Chapter 16: Configuring the Wireless Distribution System (WDS)
178
Configuring WDS Settings
You must configure the WDS settings for each access point intended to
receive hands-off and send information from the sending access point.
To configure WDS on an AT-WA7400 Access Point, perform the following
procedure:
1. From the main menu, select Advanced > Wireless Distribution
System.
The Wireless Distribution System page is shown in Figure 52 on page
179.
Note
Figure 52 shows the WDS settings page for the two-radio access
point. The web page for the one-radio access point will look slightly
different.