Manual

AT-WA7400 Management Software User’s Guide
197
Viewing System Information
You can view information about a particular access point, such as its
hardware version and current firmware version, by viewing the System
Information page.
To view system information, perform the following procedure:
1. From the main menu, select Status > Information.
The System Information page is shown in Figure 58.
Figure 58. System Information Page
The System Information page provides the following information about
the access point:
Hardware Version
The hardware version number.
Serial No.
The access point’s serial number.
MAC Address
The access point’s MAC address.
Boot Code Version
The version of the boot code currently loaded on the access point.
Firmware Version
The version of the firmware that is currently installed on the access
point.