Manual

Chapter 17: Maintenance and Monitoring
208
The Upgrade Firmware page is shown in Figure 64.
Figure 64. Upgrade Firmware Page
Information about the current firmware version is displayed and an
option to upgrade to a new firmware image is provided.
2. If you know the path to the New Firmware Image file, enter it in the text
box. Otherwise, click Browse and locate the firmware image file.
3. Click Update to apply the new firmware image.
A confirmation window is displayed that describes the upgrade
process.
4. Click OK to confirm the upgrade and start the process.
Caution
The firmware upgrade process begins after you click Update and
then OK in the confirmation window.
The upgrade process may take several minutes during which time
the access point will be unavailable. Do not power down the access
point while the upgrade is in process. When the upgrade is
complete, the access point restarts and resumes normal operation
using the factory default configuration settings.
Verifying the
Firmware
Upgrade
To verify that the firmware upgrade completed successfully, check the
firmware version shown on the Advanced > Upgrade page (and also on
the Basic Settings page). If the upgrade was successful, the updated
version name or number is displayed.