Manual

AT-WA7400 Management Software User’s Guide
21
that is connected to the access point (via wired or wireless
connection). It detects AT-WA7400 Wireless Access Points on the
network. The wizard steps you through initial configuration of new
access points, and provides a link to the AT-WA7400 management
software where you finish the basic setup process in a step-by-step
mode and launch the network.
You can also download KickStart onto the administrator’s computer
which makes it unnecessary to have the CD.
For more about using KickStart, see “Running KickStart to Find Access
Points on the Network” on page 26.
 CD-ROM Drive
The administrator’s computer must have a CD-ROM drive to run the
KickStart application on the AT-WA7400 Wireless Access Point CD or
to download it to their computer.
 Security Settings
Ensure that security is disabled on the wireless client used to initially
configure the access point.