Manual

AT-WA7400 Management Software User’s Guide
213
Restoring Access Point Settings to a Previous Configuration
To restore the configuration on an access point to previously saved
settings, perform the following procedure:
1. From the main menu, select Advanced > Backup/Restore.
The Backup/Restore page opens, as shown in Figure 66 on page 212.
2. Select the backup configuration file you want to use, either by typing
the full path and file name in the Restore field or clicking Browse and
selecting the file.
Note
Only those files that were created with the Backup function and
saved as
.cbk backup configuration files are valid to use with
Restore; for example, apconfig.cbk .
3. Click Restore.
The access point reboots.
Note
When you click Restore, the access point reboots. A reboot
confirmation dialog box and follow-on rebooting status message are
displayed. Wait for the reboot process to complete (a minute or two).
After a moment, try accessing the web pages as described in the
next step; they are not accessible until the access point has
rebooted.
4. When the access point has rebooted, access the web pages either by
clicking again on one of the pages (if the UI is still displayed) or by
typing the IP address of the AT-WA7400 Wireless Access Point as a
URL in the address field of the web browser. The URL for the access
point should be entered as
http:// IPAddressOfAccessPoint .
Now you should see the configuration settings restored to the saved
configuration from the Backup file you selected.