Manual

Appendix B: Configuring Security on Wireless Clients
230
Figure 8. Protected EAP Properties Dialog Box and EAP Properties Dialog
Box
4. Click Properties to open the Protected EAP Properties dialog box and
configure the following settings:
Validate Server Certificate
Disable this option (click to uncheck the box).
Note
This example assumes that you are using the built-in authentication
server on the access point. If you are setting up EAP/PEAP on a
client of an access point that is using an external RADIUS server,
you might see a certificate validation dialog box and need to choose
a certificate, depending on your infrastructure.
Select Authentication Method
Choose Secured password (EAP-MSCHAP v2).
5. Click Configure to open the EAP MSCHAP v2 Properties dialog box.
6. Disable (click to uncheck) the option to “Automatically use my
Windows login name etc.”
Disable (click to uncheck) Choose “secured password (EAP-MSCHAP v2)”
“Validate server certificate”
. . . then click Configure
Disable (click to uncheck) option to
automatically use Windows logon name
and password
3 4