Manual

Appendix B: Configuring Security on Wireless Clients
240
Click Properties to open the Protected EAP Properties dialog box as
shown in Figure 15.
Figure 15. Protected AP Properties Dialog Box
6. Configure the following settings.
Validate Server Certificate
Disable this option (click to uncheck the box).
Note
This example assumes you are using the Built-in Authentication
server on the access point. If you are setting up EAP/PEAP on a
client of an access point that is using an external RADIUS server,
you might certificate validation and choose a certificate, depending
on your infrastructure.
Select Authentication Method
Choose “Secured password (EAP-MSCHAP v2)”
7. Click Configure to open the EAP MSCHAP v2 Properties dialog box.
8. Disable (click to uncheck) the option to “Automatically use my
Windows login name etc.” so that upon login you will be prompted for
user name and password.
Disable (click to uncheck) Choose secured password (EAP-MSCHAP v2)
Validate server certificate
. . . then click Configure
Disable (click to uncheck) this option
3 4