Manual

AT-WA7400 Management Software User’s Guide
243
Figure 17. Association and Authentication Tabs
7. Configure the following settings on the Association tab on the Network
Properties dialog.
Network Authentication
WPA
Data Encryption
TKIP or AES depending on how this option is configured on the access
point.
Note
When the Cipher Suite on the access point is set to Both, then TKIP
clients with a valid TKIP key and AES clients with a valid CCMP
(AES) key can associate with the access point.
8. Configure these settings on the Authentication tab.
Enable IEEE 802.1x authentication for this network
Enable (click to check) this option.
EAP Type
Choose Smart Card or other Certificate.
Choose either TKIP or AES for the
Data Encryption mode
Choose WPA
Choose Smart Card or other . . . then, click
1 2
certificate and enable Authenticate
as computer when info is available
Properties