Manual

AT-WA7400 Management Software User’s Guide
271
Figure 40. PuTTY Configuration Dialog Box
2. Enter the IP address of access point and click Open.
(If your Domain Name Server is configured to map domain names to IP
addresses via DHCP, you can enter the domain name of the access
point instead of an IP address.)
This brings up the SSH command window and establishes a
connection to the access point. The login prompt is displayed.
login as:
3. Enter the default Administrator username and password for the
AT-WA7400 Wireless Access Point (
manager , friend ), and press
Enter after each. (The password is masked, so it will not be displayed
on the screen.)
login as: manager
admin@10.10.100.110's password:
Enter 'help' for help.
When the user name and password is accepted, the screen displays
the AT-WA7400 Wireless Access Point help command prompt.
AT-WA7400#
You are now ready to enter CLI commands at the command line
prompt.