Manual

AT-WA7400 Management Software User’s Guide
273
Table 3. Commands and Syntax
Command Description
get The get command allows you to get the field values of existing instances of a
class.
Classes can be named or unnamed. The command syntax is:
get
unnamed-class [ field ... | detail ]
get
named-class [ instance | all [ field ... | name |
detail ] ]
The rest of the command line is optional. If provided, it is either a list of one or
more
fields , or the keyword detail.
An example of using the get command on an unnamed class with a single
instance is:
get log
(There is only one log on the access point. This command returns information
on the log file.)
An example of using the get command on an unnamed class with multiple
instances is:
get log-entry
(There are multiple log entries but they are not named. This command returns
all log entries.)
An example of using the get command on a named class with multiple
instances is: \
get bss wlan0bssInternal
(There are multiple bss’s and they are named. This command returns
information on the BSS named wlan0bssInternal.)
An example of using the get command on a named class to get all instances:
get radius-user all name
get radius-user all
Note: wlan0bssInternal is the name of the basic service set (BSS) on the
internal network (
wlan0 interface). For information on interfaces, see
“Understanding Interfaces as Presented in the CLI” on page 278.