Manual

AT-WA7400 Management Software User’s Guide
283
Get the IP Address for the Internal Interface on an Access Point
In the following example, the IP address for the access point is:
10.10.55.216. Use the get command as shown to obtain the IP address
for the internal network.
AT-WA7400# get interface br0 ip
10.10.55.216
Get the MAC Address for an Access Point
In the following example, the MAC address for the access point is:
00:a0:c9:8c:c4:7e. Use the get command as shown to obtain the MAC
address.
AT-WA7400# get interface br0 mac
00:a0:c9:8c:c4:7e
Get Both the IP Address and MAC Address
The following command returns both the IP address and the MAC address
for an access point:
AT-WA7400# get interface br0 mac ip
Set the Location for an Access
Point
set system location NewLocation
For example:
set system location hallway
or
set system location " Vicky’s Office "
Get the Current Password
get system encrypted-password
Set the Password
set system password NewPassword
For example:
set system password admin
Get the Wireless Network Name
(SSID)
get interface wlan0 ssid
Set the Wireless Network Name
(SSID)
set interface wlan0 ssid NewSSiD
For example:
set interface wlan0 ssid Vicky
set interface wlan0 ssid "Vicky’s AP"
Table 5. Basic Settings Commands (Continued)
Function Command