Manual

AT-WA7400 Management Software User’s Guide
289
name username disabled password realname
------------------------------------------------------------
larry David White
samantha Elizabeth Montgomery
endora Agnes Moorhead
darren Dick York
wally Tony Dow
Remove a User Account
To remove a user account, type the following:
AT-WA7400# remove radius-user wally
Use the get command to view all user names. (You can see that “wally”
has been removed.)
AT-WA7400# get radius-user all name
name
--------
larry
samantha
endora
darren
Displaying Status The command tasks and examples in this section show status information
on access points. These settings correspond to what is shown on the
Status pages in the web UI. (See “Monitoring Wired and Wireless LAN
Settings” on page 184, “Viewing the Event Logs” on page 186, “Viewing
the Transmit/Receive Statistics” on page 190, “Viewing the Associated
Wireless Clients” on page 192, and “Viewing the Status of Neighboring
Access Points” on page 193.)
Note
Make sure you are familiar with the names of the interfaces as
described in “Understanding Interfaces as Presented in the CLI” on
page 278. The interface name you reference in a get command
determines whether the command output shows a wired or wireless
interface, the internal or guest network, or (on a two-radio access
point) to radio one or radio two.
Table 8 provides a quick view of all Status commands and links to detailed