Manual

AT-WA7400 Management Software User’s Guide
29
Note
The KickStart utility only finds other AT-WA7400 Wireless Access
Points.
If KickStart does not find the AT-WA7400 Wireless Access Point you
just installed, an informational window is displayed with
troubleshooting information about your LAN and power connections.
6. Review the list of access points that KickStart found, as shown in the
example in Figure 4 on page 28..
The access points are listed with their locations, media access control
(MAC) addresses, and IP addresses. If you are installing the first
access point on a single-access-point network, only one entry is
displayed on this page.
7. Verify the MAC addresses against the hardware labels for each access
point. This will be especially helpful later in providing or modifying the
descriptive Location name for each access point.
8. Click Next.
The Administration dialog box opens, as shown in Figure 5.
Figure 5. Administration Dialog Box
Note
KickStart provides a link to the AT-WA7400 management software
web pages via the IP address of the first access point of each model.
(For more information about model types and clustering see “What
Kinds of Access Points Can Cluster Together?” on page 44.)