Manual

Chapter 2: Setting up the AT-WA7400 Management Software
30
The AT-WA7400 management software is a centralized
management tool that you can access through the IP address for
any access point in a cluster.
After your other access points are configured, you can also link to
the AT-WA7400 management software web pages using the IP
address for any of the other AT-WA7400 Wireless Access Points, for
example http:// IPAddressOfAccessPoint .
Installing
KickStart on the
Administrator’s
PC
To install the KickStart utility on the administrator’s PC, perform the
following procedure:
1. Insert the AT-WA7400 Wireless Access Point CD into the CD-ROM
drive on your computer.
The CD’s main page is shown in Figure 1 on page 27.
Click KickStart Utility.
The KickStart page, as shown in Figure 2 on page 27, provides two
options: Open KickStart and Install KickStart.
The Open KickStart option is described in “Running KickStart to Find
Access Points on the Network” on page 26.
2. Click Install KickStart.
The KickStart Setup Wizard dialog box is shown in Figure 6.
Figure 6. KickStart Setup Wizard Dialog Box
3. Click Next.