Manual

AT-WA7400 Management Software User’s Guide
323
rsn-preauthentication off
Enabling and
Configuring the
Guest Login
Welcome Page
The guest login and welcome page commands are shown in Table 24.
Note
Guest login settings are only relevant if you have first configured a
guest network. For information about configuring a guest network,
see Chapter 11, “Setting Up Guest Access” on page 133.
You can set up a captive portal that guest clients will see when they log on
to the guest network. or modify the Welcome screen guest clients see
when they open a web browser or try to browse the web.
View Guest Login Settings
To view the current settings for guest login:
AT-WA7400# get portal
Field Value
------------------------------------------------------------------
status down
welcome-screen on
Table 24. Guest Login and Welcome Page Commands
Function Command
View all guest login
settings
get portal
Enable guest login and
Welcome page
set portal status up
Disable guest login and
Welcome page
set portal status down
Specify Guest Welcome
page text for the captive
portal
set portal welcome-screen-text " Welcome Screen Text "
Where “ Welcome Screen Text ” is the content of the Welcome
message you want displayed on the Guest Welcome page. The
Welcome message must be in quotes if it contains spaces,
punctuation, and special characters.