Manual

AT-WA7400 Management Software User’s Guide
329
wlan0 6
wlan0 5.5
wlan0 2
wlan0 1
Get Basic Rate Set
The Basic Rate Set is what the access point will advertise to the network
for the purposes of setting up communication with other access points and
client stations on the network. It is generally more efficient to have an
access point broadcast a subset of its supported rate sets.
AT-WA7400# get basic-rate
name rate
-----------
wlan0 11
wlan0 5.5
wlan0 2
wlan0 1
Configure Radio Settings
Note
To get a list of all fields you can set on the access point radio, type
the following at the CLI prompt: set radio wlan0 [SpaceKey]
[TAB] [TAB].
Turn the Radio On or Off
The commands to turn the radio on or off are listed inTable 26.
Set the Radio Mode
Valid values depend on the capabilities of the radio. Possible values and
Table 26. Radio Operation Commands
Function Command
Turn the radio on
set radio wlan0 status on
Turn the radio off
set radio wlan0 status off