Manual

AT-WA7400 Management Software User’s Guide
337
Table 30 provides a quick view of QOS commands.
Table 30. QoS Commands
Function Command
Enable/Disable Wi-Fi Multimedia
set radio wlan0 wme off
set radio wlan0 wme on
get radio wlan0 wme
About Access Point and Station
EDCA Parameters
See “About Access Point and Station EDCA Parameters” on
page 338.
Understanding the Queues for
Access Point and Station
See “Understanding the Queues for Access Point and
Station” on page 339.
Distinguishing between Access
Point and Station Settings in QoS
Commands
See “Distinguishing between Access Point and Station
Settings in QoS Commands” on page 339
Get QoS Settings on the Access
Point
get tx-queue
Get QoS Settings on the Client
Station
get wme-queue
Set Arbitration Interframe Spaces
(aifs)
On the access point:
set wme-queue wlan0 with queue Queue_Name to
aifs
AIFs_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
aifs
AIFs_Value
See examples in “Set Arbitration Interframe Spaces (aifs)”
on page 340.
Set Minimum and Maximum
Contention Windows (cwmin,
cwmax)
On the access point:
set tx-queue wlan0 with queue Queue_Name to
cwmin
cwmin_Value cwmax cwmax_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
cwmin
cwmin_Value cwmax cwmax_Value
See examples in “Set Minimum and Maximum Contention
Windows (cwmin, cwmax)” on page 341.
Set the Maximum Burst Length
(burst) on the Access Point
set tx-queue wlan0 with queue Queue_Name to
burst
burst_Value
See examples in “Set the Maximum Burst Length (burst) on
the Access Point” on page 343.