Manual

Appendix D: Command Line Interface (CLI) for Access Point Configuration
344
wlan0 data2 3 15 63 0.5
wlan0 data3 7 15 1023 0
Set Transmission Opportunity Limit (txop-limit) for WMM client
stations
The Transmission Opportunity Limit ( txop-limit ) specifies an interval of
time (in milliseconds) when a WMM client station has the right to initiate
transmissions on the wireless network. The
txop-limit applies only to the
client stations (station-to-access point traffic).
To set the
txop-limit on station-to-access point traffic:
set wme-queue wlan0 with queue Queue_Name to txop-limit txop-
limit_Value
Where Queue_Name is the queue on the station to which you want the
setting to apply and
txop-limit_Value is the value you want to specify for
the
txop-limit .
For example, this command sets the
txop-limit on the station Voice
queue (vo) to 49.
AT-WA7400# set wme-queue wlan0 with queue vo to txop-limit 49
View the results of this configuration update (bold in the command output
highlights the modified value):
AT-WA7400# get wme-queue
name queue aifs cwmin cwmax txop-limit
--------------------------------------------
wlan0 vo 14 3 7
49
wlan0 vi 2 7 15 94
wlan0 be 3 15 1023 0
wlan0 bk 7 15 1023 0
Wireless
Distribution
System
Note
Before configuring this feature, make sure you are familiar with the
names of the interfaces as described in “Understanding Interfaces
as Presented in the CLI” on page 278. The interface name you
reference in a command determines whether a setting applies to a
wired or wireless interface, the internal or guest network, or (on a
two-radio access point) to radio one or radio two.