Manual

Chapter 3: Managing Access Points and Clusters
48
Understanding and Changing Access Point Settings
The Access Points page provides information about all access points in
the cluster.
From this page, you can view location descriptions, IP addresses, enable
(activate) or disable (deactivate) clustered access points, and remove
access points from the cluster. You can also modify the location
description for an access point.
The IP address links provide a way to navigate to configuration settings
and data on an access point.
Standalone access points (those which are not members of the cluster)
are not shown on this page.
To view or edit information on access points in a cluster, perform the
following procedure:
1. From the main menu, select Cluster > Access Points.
The Access Points page is shown in Figure 17. This page shows any
access points that are connected to a cluster.
Figure 17. Access Points Page
2. Click Refresh to update the access points list.
The Access Points page provides the following information:
Location
Description of where the access point is physically located.
MAC Address
The media access control (MAC) address of the access point.